Load Measuring Pin up to 1500t.
The range of Load Measurement Pins (LMP’s) are designed for use in applications where an end of line load cell cannot be used, meaning an integrated solution is required. Often a customised solution, they are manufactured from high tensile stainless steel and are normally supplied complete with an anti-rotation plate as a cabled or wireless solution.
Built to withstand the harshest environments in industries such as marine and offshore oil and gas, they are suitable for use in exposed situations and can also be supplied to withstand immersion in seawater at extreme depths.
Straightpoint Loadpins are typically connected to Straightpoint’s Handheld plus, or may be supplied with a vast array of output formats. These include mV/V, RS-422, RS-485, utilising the ASCII, MODBUS RTU and CAN-BUS protocols or an analogue output such as 4-20mA for PLC integration. All are also supplied with a 10 metre or 32ft cable as standard, however, usable cable length varies greatly with lengths available to 1500 metres or 4900ft, depending on output format.
Requires connection to Crosby | Straightpoint’s Handheld plus (HHP) or External Amplifier range (SA-3420) that can be configured to provide outputs such as 4-20mA, 0-10v, 0-5v for PLC or data logger integration.
Please note: Please advise cable configuration on order – Radial or Axial pin exit. If you require a Loadpin to a particular size and design contact our sales department.
- Marine tankers, offshore platforms.
- Elevator and floor conveyor testing and certification.
- Bearing blocks, pivots and shackles.
- Cable laying equipment.
- Rope, chain and brake anchors.
- Bridge support cables.
- Mooring lines.
- Pulleys and sheaves.
- Crane cables.
- Hoisting gear.
- Design validated by F.E.A.
To view our entire range of Load Monitoring please click here.
For more information on Load Measuring Pin please visit https://www.straightpoint.com/