Thimble – Solid Type
Thimble – Solid TypeThimble – Solid Type

Thimbles – Solid Type

From £3.77 ex VAT

Clear selection

Solid Thimble

Material Malleable cast iron
Standard BS 464 – table 3 – 1958
Finish Self colour – hot dipped galvanised available, prices on request. Also, prices for drilled and/or machined finish are available on request
Notes As standard the castings are supplied unmachined, for the BS464 standard to apply, thimbles require machining both sides. * Dimension shown C – width outside is the finished size after machining both sides and not the size of the casting offered as standard. ** The maximum pin hole size permitted in the standard

 

Diameter Rope Width Overall Width Outside Width Inside Length Overall Maximum Hole Permitted Product Code Weight Each
a inch b inch c inch * d inch e inch ** kg
5/16 1.3/8 7/16 1 1.7/8 1/2 44001 0.09
3/8 1.3/4 9/16 1.1/4 2.1/4 5/8 44002 0.17
7/16 2.1/16 11/16 1.1/2 2.3/4 3/4 44003 0.30
1/2 2.3/8 13/16 1.3/4 3.1/4 7/8 44004 0.39
5/8 2.3/4 7/8 2 3.3/4 1 44005 0.60
3/4 3.3/8 1.1/8 2.1/2 4.5/8 1.1/4 44006 1.19
7/8 3.3/4 1.1/4 2.3/4 5 1.3/8 44007 1.57
15/16 4.1/8 1.5/16 3 5.1/2 1.1/2 44008 1.73
1 4.1/2 1.7/16 3.1/4 6 1.5/8 44009 2.43
1.1/8 4.7/8 1.9/16 3.1/2 6.1/2 1.3/4 44010 3.12
1.1/4 5.1/2 1.3/4 4 7.1/2 2 44011 4.40
1.3/8 6.1/8 2 4.1/2 8.1/4 2.1/4 44012 6.32
1.1/2 6.3/4 2.1/4 5 9.1/4 2.1/2 44.13 9.20