Tiger Fixed Two Jaw Sliding Beam Anchor.
These units meet the requirements of EN 795:2012/B and ANSI/ASSE Z359.1-2007. CE Certified – CE 1019.
Tiger Beam Anchors are used as anchorage connectors for personal fall arrest systems. They are designed to be attached to Horizontal I-Beams with an attached personal fall arrest system (full body safety harness, shock absorbing lanyard or fall arrest block). The Tiger single jaw sliding clamp can also be attached to Vertical I-Beams (see model TYAA14).
Features
- Anchorage connectors for personal fall arrest systems
- Quick and versatile anchorage point for personal fall protection equipment
- Unit weight from 1.9kg – 2.5kg
- Minimum Breaking Strength 22.3 kN (5,000 lb/2.27 tonne)
- Easy adjustment
- Capacity 140kg
- Beam width ranges 2.5″ to 24″, 6.35cm to 60cm
Certification
Each unit comes fully certified with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements of the Machinery Directive 2006/42/EC. Each unit is also supplied with Manufacturer’s Instructions for Use.
Recommendation
We advise that structural calculations are carried out on all beams and supporting steel work by qualified engineering departments to ensure safe operation.
To view our entire range of Beam Anchors please click here.
For more information on the Tiger Two Jaw Sliding Beam Anchor please visit http://www.tigerlifting.com/products/tyaa21-two-jaw-sliding-beam-anchor/